|Home||» Products||» Instrumentation and Measurement Infra||» Pressure Control Setup|
Pressure Control Setup
Pressure Control Setup comprises of Pressure tank fitted with Pressure transmitter to measure the pressure. The pressure is controlled by a pneumatic control valve operated by a I to P converter. The input pressure is fed from air compressor. The whole system is mounted on a Table top Model with all necessary Piping.
The electronic panel comprises of ADC/DAC card with RS-232 interface. Displays indicate the process value and set value in the PC through RS - 232 C Port
Software is provided for experimentation, PID Control settings (P, PI, PD and PID mode) Data storing, Online data acquisition, Off line analysis, Printing of data's can be done easily.
Pressure Transmitter: 5 Kg/cm2 strain gauge based.
Output : 4 - 20m A
Pressure Tank : 2 Liter Capacity
Control Value : Globe 2 way ½" with Diaphragm type actuator, Total stem travel 18 mm, Air operated, 3 to 15 PSI pressure.
Air Regulator : ¼" BSP, for 0 to 15 PSI pressure
I/P Converter : 4 to 20mA input output 3 to 15 PSI
ADC/DAC Card : 12 bit resolution,8 input 1 output with Rs 232 Serial Interface to PC.
PID Controller : Software to set P, PI, PID, PD Mode with Controller and Acquisition, Trend plot, Offline, Analysis and Printing.